Import an RSA Key

Controllers, service platforms and access points can import RSA keys utilized by other devices.

Use this procedure to import an RSA Key.

  1. Go to Devices and select a target device.
  2. Select the Certificate tab.
  3. Select the RSA Keys tab.
  4. Select and configure the parameters as described in RSA Keys – Import Parameters.
    Table 1. RSA Keys – Import Parameters
    Parameter Description
    Key Name Enter the name (up to 32 characters) of the RSA key to be imported.
    Key Passphrase Define the key used by both the controller or service platform and the server (or repository) of the target RSA key. Select to view the characters used in the passphrase. Otherwise, the passphrase displays as a series of asterisks (****).
    Path/File Specify the path to the RSA key. Enter the complete relative path to the key on the server.
  5. Select OK to import the defined RSA key.
9037761-05 Rev AA